As with any stain, the number one advantage you have is speed. The sooner you can deal with a stain the better your chances of removing it are. The longer a liquid sits on your carpet, the more likely it will become a permanent stain. The main reason for this is that at the heart of any carpet are the carpet fibers. These tiny fibers are spun tightly into a strand that is attached to a backing material to create your carpet. When a liquid is dropped onto these fibers they start to soak it up and will also start to dry. If this happens it makes removing the stain a lot harder. The good news is that most modern carpets are treated to be stain resistant. Many of them are also treated to be more durable as well for pet stains. The way this protection is added to the carpet is by treating the fibers with a chemical that makes them absorb liquids more slowly. The more expensive carpets absorb stains even more slowly than the less expensive ones. The thing to remember is that the fibers don’t repel stains; they just absorb them more slowly, so they will still become stained if the liquid is left long enough. This is why you need to address the stain as soon as possible to avoid the long-term damage. Also, even though the fibers are stain resistant, the backing material and padding aren’t and can soak up a lot of the pet stain if you don’t remove it quickly.

The first ting you need to do when you discover a stain is to try and remove as much of the liquid as possible. If it is a large area that has been affected, you may have to pull the carpet back from the nearest corner to expose the padding beneath it. If this padding is wet, you should cut out the affected area and discard it. This can easily be replaced with another piece of padding from the local home improvement store to match. This padding is easy to cut to size and fairly inexpensive. You want to try and attack the liquid that hit the carpet from both sides, so place a layer of paper towels down on top of a layer or newspapers and then lay the carpet back down. On the top of the carpet lay the paper towels down first and then the layer of newspaper. Add some weight to the area to push the carpeting into the towels to absorb the liquid. Let this sit a while and repeat and replace the towels as needed until they are dry.

Once you have removed as much of the liquid as possible, mix a solution of warm water and white vinegar in a bucket. Try to keep the mix to about a cup of white vinegar to a gallon of warm water. This may smell a little funny, but will dry odorless. Apply this cleaning solution to the carpet and repeat the towel padding until dry. When you have completed the process, vacuum the room to finish off the cleaning. This should solve the staining problem and leave your carpet clean and smelling fresh.

The first thing to do when a pet urinates on your carpet is to remove as much of the liquid as possible. The best way to do this is to blot the area with newspaper, or paper towels until you have removed most of the liquid. You can use a pair of latex gloves to protect your hands during the cleaning just to be safe. Place a thick layer of paper towels over the area and then a layer of newspapers. Stand on the area for a minute or two and then discard the paper towels. If the newspaper is wet, discard this as well. Repeat the process until the paper towels are no longer wet and then you can proceed to the actual cleaning. The more liquid you remove at this stage, the easier the cleaning will go and the less chance you will have of odors developing. If the stain is a large one, you may need to peel back the carpeting to remove the excess liquid beneath the carpet. If you do this, be sure to remove and discard the padding under the carpeting since this will act like a sponge and retain the urine, which can develop a long-term odor. You can easily buy a section of the padding cheaply from a local home improvement store to replace the damaged one. If the liquid has soaked into the actual flooring material, or if you haven’t gotten to the stain in time and it has dried, you may need to seal the flooring with a latex paint or varnish to prevent the odor.

Once you have removed any liquid and the area is essentially dry, you can clean the carpeting with a mixture of white vinegar and water. Mix about a ¼ cup of vinegar to about a quart of water. Apply this to the carpet with a sponge and try not to soak the carpet. Once this has been applied, go back to the blotting technique to remove the liquid and the stain. If this isn’t completely successful you may need to use an enzymatic cleaner. These can be found at most home improvement store and are fairly inexpensive. The key to this type of cleaner is that it is organic in nature and will work well with pet stains.

Once the stain has been removed you may want to consider an organic pet odor product to treat the carpet just to make sure that odors won’t develop. It is really important to remove any hint of an odor so that your pet won’t consider this a good place to repeat the mistake. Pets like to relieve themselves in a specific area and if they can detect odor from their urine, they will likely visit this area again. Another good idea is to temporarily place the wet paper towels from the cleaning in the area you do want your pets to relieve themselves and this can help train them on where to go.

Once an accident has occurred, you need to remedy the situation quickly. This requires a cleaning of the area and a re-training of the pet to let them know where they should be relieving themselves. This may be as simple as taking one of the soiled paper towels from the cleanup effort and placing it in the proper area for the pet. This way they can detect their scent and know that this new area would be a good place to relieve themselves in the future.

The first thing you need to do when starting a pet stain cleanup is to figure out how big of an area is stained. You can do this by blotting the carpet in a circle to try to find the edge of the stain. You can also use a black light to see the actual urine stains as well. When you use one of these black lights in the dark, they will illuminate the urine in the carpet and show you exactly what the extent of the stain really is. Once you know how much of the carpet needs cleaning you’re ready to attack the area. If you have gotten to the area quickly, you need to remove as much of the liquid as possible before trying to deal with the stain. This liquid is easier to remove now than after it dries, and the more you can eliminate, the better the chances of avoiding an odor later. To remove this liquid, blot the area with paper towels and newspaper. A good technique to use is to place a layer of paper towels on the carpet, cover it with a later of newspapers and then stand on the area, or place a few phonebooks on the paper to weigh it down. This will allow you to leave the area while the paper towels absorb the liquid. You need to continue this process until the paper towels are dry. If there was a lot of liquid to start, you may be better off peeling back the carpet to expose the padding and flooring beneath it. You can cut and remove the padding and then dry the floor directly. This works better than trying to draw the liquid back up through the carpet. You can easily replace this padding when finished with an inexpensive piece from a local home improvement store.

Once the liquid has been removed, you can clean the carpet with a solution of warm water and a small amount of detergent. Apply this with a sponge and repeat the blotting action to make sure you get all of the liquid up from the carpet. It might also be a good idea to treat the area with a commercial pet deodorizer when you have finished the process as well to ensure there are no lingering odors.